TPS3606-33DGS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 424mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS3606 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 10 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 424mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 2.87V |
| Max Reset Threshold Voltage | 2.99V |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.99V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3606-33DGS Overview
There are 10 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tube. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 3.3V-voltage supply. Power ics operate at 1 supply voltages. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 10 pins. The pins of the power management system count 10. Supply voltage (Vsup) should be at least 1.65V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 20μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to TPS3606, the base PMIC number. The maximum supply temperature voltage supervisor can handle is 40μA.
TPS3606-33DGS Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3606-33DGS Applications
There are a lot of Texas Instruments TPS3606-33DGS Voltage Supervisors applications.
- WiFi router
- Consumer electronics
- Personal computers
- Cloud computing
- Network equipment
- Digitally controlled LDO regulators circuit
- Automotive power systems
- emergency room
- Satellite navigation
- Utility meter
