TPS3606-33DGSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 424mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS3606 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 10 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 424mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 2.87V |
| Max Reset Threshold Voltage | 2.99V |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.99V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3606-33DGSR Overview
As you can see, this power management is mounted through 10 terminals. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. There are 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. In a 3.3V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 10. There are 10 pins on the power managment ic. IC management can only work with a supply voltage of 1.65V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 20μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3606, which is the base power ics number. The maximum supply temperature voltage supervisor can handle is 40μA.
TPS3606-33DGSR Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3606-33DGSR Applications
There are a lot of Texas Instruments TPS3606-33DGSR Voltage Supervisors applications.
- Military communications
- Electronics installed in the vehicle
- Battery cars
- Military electronics
- Automotive power systems
- DSP
- Microprocessor system
- Insulation fault location system
- Automotive permanent magnet synchronous motors
- Precision measurement
