Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Type |
Battery Backup Circuit |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
424mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Base Part Number |
TPS3606 |
Output |
Push-Pull, Totem Pole |
Pin Count |
10 |
Operating Supply Voltage |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
20μA |
Nominal Supply Current |
40μA |
Power Dissipation |
424mW |
Max Supply Current |
40μA |
Adjustable Threshold |
NO |
Quiescent Current |
20μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
60ms Minimum |
Min Reset Threshold Voltage |
2.87V |
Max Reset Threshold Voltage |
2.99V |
Threshold Voltage |
2.93 |
Undervoltage Threshold |
2.93V |
Overvoltage Threshold |
2.99V |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3606-33DGSRG4 Overview
There are 10 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 10 pins that are attached to IC management. Power managment ic pin count is 10. IC management can only work with a supply voltage of 1.65V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 20μA. To find similar IC managements from the manufacturer, you can always search by TPS3606. The power management can work with a maximum supply temperature of 40μA.
TPS3606-33DGSRG4 Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3606-33DGSRG4 Applications
There are a lot of Texas Instruments TPS3606-33DGSRG4 Voltage Supervisors applications.
- DSP
- Important electronics for automotive safety
- Analog circuit
- Household appliances
- Functional modules
- Insulation fault location system
- Automotive permanent magnet synchronous motors
- FPGA design
- Smartphones
- Efficient information transmission