TPS3610T50PWG4
| Parameters | |
|---|---|
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS3610T50 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 4.46V |
| Max Reset Threshold Voltage | 4.64V |
| Undervoltage Threshold | 4.46V |
| Overvoltage Threshold | 4.64V |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TPS3610T50PWG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 14 in total. Power management is packaged in a Tube way. In this PMIC, you can find 1 functions for your reference. There are a total of 2 channels on this supervisor, and they are arranged in a series. IC management is packaged as a 14-TSSOP (0.173, 4.40mm Width) package. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 5V. IC management conducts in a 1-voltage supply. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 14 pins on the board. 14 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.65V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 40μA. A similar IC managements number of the manufacturer can always be found by using TPS3610T50, the base power ics number. To operate this power management, you will need at least 5V volts of power. The maximum supply temperature voltage supervisor can handle is 40μA.
TPS3610T50PWG4 Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
40μA operating supply current
TPS3610T50PWG4 Applications
There are a lot of Texas Instruments TPS3610T50PWG4 Voltage Supervisors applications.
- Electrical fire monitoring system
- Microprocessor system
- Battery-powered equipment
- Medical-specific insulation monitor
- Detection of phase imbalance
- Power distribution systems of CCU
- Battery cars
- Leakage protection
- Automotive permanent magnet synchronous motors
- Electric heating appliances
