TPS3610T50PWR
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS3610T50 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 4.46V |
| Max Reset Threshold Voltage | 4.64V |
| Threshold Voltage | 2.4 |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.64V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
TPS3610T50PWR Overview
There are 14 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 2 channels. The purpose of this IC power is to provide you with a reference of 14-TSSOP (0.173, 4.40mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 5V supply voltages. During operation, the power ic is supplied with a voltage of 1. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 14. 14 pins are present on the power management system. Supply voltage (Vsup) should be at least 1.65V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. Supplied with a operating current of 20μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by TPS3610T50. There is a requirement for 5V power to power this power management. A maximum supply temperature of 40μA can be used with this power management.
TPS3610T50PWR Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3610T50PWR Applications
There are a lot of Texas Instruments TPS3610T50PWR Voltage Supervisors applications.
- Battery cars
- Display equipment
- Insulation fault location system
- Power distribution systems of CCU
- Sensitive sensors
- Smart meter
- Battery cars
- Battery-powered equipment
- Military communications
- DC stabilized power supply module
