TPS3613-01DGS
| Parameters | |
|---|---|
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 424mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS3613 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 10 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 424mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 20μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 1.13V |
| Max Reset Threshold Voltage | 1.17V |
| Threshold Voltage | 1.15 |
| Overvoltage Threshold | 1.17V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TPS3613-01DGS Overview
It is mounted through 10 terminals on the power management. Packaged in a Tube-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 2 channels that can be found. IC management is packaged as a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 1.8V volt supply. IC management conducts in a 1-voltage supply. The power management belongs to the Power Management Circuits subcategory. 10 pins are present in total in this power management. There are 10 pins on the supervisor. Supply voltage (Vsup) should be at least 1.65V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 20μA supply current present in the power management. It is always advisable to use TPS3613, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 40μA.
TPS3613-01DGS Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3613-01DGS Applications
There are a lot of Texas Instruments TPS3613-01DGS Voltage Supervisors applications.
- Household appliances
- Detection of phase imbalance
- Important electronics for automotive safety
- Rechargeable batteries
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
- Display equipment
- Kitchen appliances
- Cloud computing
- Battery cars
