banner_page

TPS3613-01DGSR

1.8V10 Terminals 10-Pin TPS3613 Voltage supervisor2 Channels Min 1.65V Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3613-01DGSR
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: -
  • Stock: 999
  • Description: 1.8V10 Terminals 10-Pin TPS3613 Voltage supervisor2 Channels Min 1.65V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 10
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Max Power Dissipation 424mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Base Part Number TPS3613
Output Push-Pull, Totem Pole
Pin Count 10
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 1.65V
Operating Supply Current 20μA
Nominal Supply Current 40μA
Power Dissipation 424mW
Max Supply Current 40μA
Adjustable Threshold YES
Quiescent Current 20μA
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold Adjustable/Selectable
Number of Voltages Monitored 1
Reset Timeout 60ms Minimum
Min Reset Threshold Voltage 1.13V
Max Reset Threshold Voltage 1.17V
Threshold Voltage 1.15
Overvoltage Threshold 1.17V
Height 1.07mm
Length 3mm
Width 3mm
Thickness 1.02mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS3613-01DGSR Overview


This power management consists of 10 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 2 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your convenience. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 1.8V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 10 pins. Power managment ic pin count is 10. It is recommended that Vsup should not be less than 1.65V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 20μA. A similar IC managements number of the manufacturer can always be found by using TPS3613, the base power ics number. The maximum supply temperature that PMIC chip can work with is 40μA.

TPS3613-01DGSR Features


Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current

TPS3613-01DGSR Applications


There are a lot of Texas Instruments TPS3613-01DGSR Voltage Supervisors applications.

  • Sensitive sensors
  • Data storage applications
  • Refrigeration
  • Personal computers
  • Radar
  • Detection of phase sequence
  • Military communications
  • emergency room
  • Detection of phase loss
  • Military electronics

Write a review

Note: HTML is not translated!
    Bad           Good