TPS3613-01DGSRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 424mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS3613 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 10 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 424mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 20μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 1.13V |
| Max Reset Threshold Voltage | 1.17V |
| Threshold Voltage | 1.15 |
| Overvoltage Threshold | 1.17V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3613-01DGSRG4 Overview
A total of 10 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power management is made up of 2 channels which are available in a series format. Please refer to power management for 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1.8V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 10 pins on IC management. There are 10 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.65V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 20μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by TPS3613. The maximum supply temperature is 40μA.
TPS3613-01DGSRG4 Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3613-01DGSRG4 Applications
There are a lot of Texas Instruments TPS3613-01DGSRG4 Voltage Supervisors applications.
- WiFi router
- Power distribution systems of operating room
- Leakage protection
- Computer applications
- Important electronics for automotive protection
- Functional modules
- Automotive power systems
- Fire equipment power monitoring system
- Smartphones
- Digitally controlled LDO regulators circuit
