Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Battery Backup Circuit |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS3617 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
20μA |
Nominal Supply Current |
40μA |
Power Dissipation |
470mW |
Max Supply Current |
40μA |
Adjustable Threshold |
NO |
Quiescent Current |
20μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
60ms Minimum |
Min Reset Threshold Voltage |
4.46V |
Threshold Voltage |
4.55 |
Undervoltage Threshold |
4.55V |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3617-50DGKR Overview
This power management consists of 8 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. This power management has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.65V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TJ . While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 20μA. There are other features such as RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR to name a few. For similar manage ics search of the manufacturer, you can always refer to TPS3617, the base PMIC number. There is a requirement for 5V power to power this power management. The power management can work with a maximum supply temperature of 40μA.
TPS3617-50DGKR Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3617-50DGKR Applications
There are a lot of Texas Instruments TPS3617-50DGKR Voltage Supervisors applications.
- Sensitive sensors
- Network equipment
- Kitchen appliances
- Dash board
- Leakage protection
- Smartphones
- Important electronics for automotive safety
- Household appliances
- Embedded computing
- Utility meter