TPS3618-50DGKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3618 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 470mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Max Input Voltage | 5.5V |
| Min Reset Threshold Voltage | 4.46V |
| Threshold Voltage | 4.55 |
| Undervoltage Threshold | 4.55V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3618-50DGKT Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 8 pins on power management. This power management system has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.65V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 20μA. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use TPS3618, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 40μA.
TPS3618-50DGKT Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3618-50DGKT Applications
There are a lot of Texas Instruments TPS3618-50DGKT Voltage Supervisors applications.
- Automotive power systems
- Microcontroller system
- Refrigeration
- Transformer load monitoring equipment
- Kitchen appliances
- Functional modules
- Consumer electronics
- Data storage applications
- Linux and server computing
- DVR
