TPS3619-33DGKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3619 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 470mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3619-33DGKRG4 Overview
As you can see, this power management is mounted through 8 terminals. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 1.65V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Power management is also possible to add other features such as MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING to name a few. You can always use TPS3619, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 40μA.
TPS3619-33DGKRG4 Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
15μA operating supply current
TPS3619-33DGKRG4 Applications
There are a lot of Texas Instruments TPS3619-33DGKRG4 Voltage Supervisors applications.
- Refrigeration
- Microprocessor system
- Radio
- Important electronics for automotive protection
- Multi-voltage system
- Dash board
- emergency room
- Precision measurement
- Data storage applications
- Cloud computing
