TPS3620-33DGKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3620 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 470mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3620-33DGKT Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference. There are a lot of similarities between this IC management and other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. The pins of the power management system count 8. IC management can only work with a supply voltage of 1.65V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to TPS3620, the base PMIC number. A maximum supply temperature of 40μA can be used with this power management.
TPS3620-33DGKT Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
15μA operating supply current
TPS3620-33DGKT Applications
There are a lot of Texas Instruments TPS3620-33DGKT Voltage Supervisors applications.
- Unattended substation automation
- Medical-specific insulation monitor
- Network equipment
- Microcontroller system
- Detection of phase imbalance
- Set top box
- FPGA design
- Utility meter
- Power distribution systems of ICU
- Detection of phase loss
