TPS3620-33MDGKTEP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3620 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 470mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | 2.93 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3620-33MDGKTEP Overview
There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. Pin count of the power management is 8. A voltage (Vsup) that doesn't fall below 1.65V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -55°C~125°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. Power management is also possible to add other features such as MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING to name a few. To find similar IC managements from the manufacturer, you can always search by TPS3620. The maximum supply temperature is 40μA.
TPS3620-33MDGKTEP Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
TPS3620-33MDGKTEP Applications
There are a lot of Texas Instruments TPS3620-33MDGKTEP Voltage Supervisors applications.
- Power distribution systems of CCU
- Insulation fault location system
- Electrical fire monitoring system
- Microprocessor system
- Rechargeable batteries
- WiFi router
- Kitchen appliances
- Cloud computing
- Medical-specific isolation transformer
- Power distribution systems of operating room
