TPS3620-50DGKTG4
| Parameters | |
|---|---|
| Package / Case | VSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 470mW |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 470mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Reset | Active Low |
| Voltage - Threshold | 4.55V |
| Reset Timeout | 60 ms |
| Min Reset Threshold Voltage | 4.46V |
| Max Reset Threshold Voltage | 4.64V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.64V |
| Height | 970μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS3620-50DGKTG4 Overview
It is mounted through 8 terminals on the power management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of VSSOP functions. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 5V volt supply. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. This power management has 8 pins. Supply voltage (Vsup) should be at least 1.65V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The supply current of the power management is 15μA. As well as this, there are other features to mention such as [0], for example. It is also possible to use other types of IC, such as POWER SUPPLY SUPPORT CIRCUIT, in this supervisor. A maximum supply temperature of 40μA can be used. With 1 elements, this supervisor is used in all areas of target applications.
TPS3620-50DGKTG4 Features
Minimum supply voltage of 1.65V
15μA operating supply current
TPS3620-50DGKTG4 Applications
There are a lot of Texas Instruments TPS3620-50DGKTG4 Voltage Supervisors applications.
- Leakage current detection
- Satellite navigation
- Urban rail transit weak current power monitoring
- Power distribution systems of operating room
- Radio
- Dash board
- External alarm
- emergency room
- Data storage applications
- Consumer electronics
