TPS3705-30D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR WITH MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS3705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 725mW |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 30μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.63 |
| Undervoltage Threshold | 2.63V |
| Overvoltage Threshold | 2.7V |
| Input Capacitance | 5pF |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3705-30D Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tube. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 3V supply voltages. Power management conducts at a voltage of 1. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 8 pins on IC management. Pin count of the power management is 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 30μA is the recommended value. Among other features, IC power can be also taken advantage of [0], for instance. For similar manage ics search of the manufacturer, you can always refer to TPS3705, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 50μA. This power management system is featured with 2 elements and has been profoundly used in all aspects of target applications.
TPS3705-30D Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current
TPS3705-30D Applications
There are a lot of Texas Instruments TPS3705-30D Voltage Supervisors applications.
- FPGA design
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
- Battery-powered equipment
- Personal computers
- Detection of phase loss
- Important electronics for automotive safety
- Electronics installed in the vehicle
- Set top box
- Linux and server computing
