TPS3705-33DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 725mW |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 30μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3705-33DG4 Overview
There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3.3V. In a 1 supply voltage, the PMIC chip conducts. There is a subcategory called Power Management Circuits for this power management. In total, it has 8 pins on IC management. This power management system has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 30μA. For similar manage ics search of the manufacturer, you can always refer to TPS3705, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 50μA. voltage supervisor is comprised of 2 elements and has been extensively used across a wide array of target applications.
TPS3705-33DG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current
TPS3705-33DG4 Applications
There are a lot of Texas Instruments TPS3705-33DG4 Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
- Power distribution systems of infant care room
- Display equipment
- Smart meter
- Electric heating appliances
- Computer applications
- Dash board
- Rechargeable batteries
- Battery-powered equipment
