TPS3705-50DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 30μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.65V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3705-50DGN Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions for your convenience. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. Power ics operate at 1 supply voltages. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 8 pins. The pins of the power management system count 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The power management's supply current is 30μA. Additionally, IC management are a variety of features, for example [0], to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3705, which is the base power ics number. A maximum supply temperature of 50μA can be used. The power management system contains 2 elements and has been extensively applied in various target applications.
TPS3705-50DGN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current
TPS3705-50DGN Applications
There are a lot of Texas Instruments TPS3705-50DGN Voltage Supervisors applications.
- Power communication system
- Efficient information transmission
- Radio
- WiFi router
- Sensitive sensors
- Military communications
- Power distribution systems of operating room
- Precision measurement
- Radar
- Electronics installed in the vehicle
