TPS3705-50DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 30μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.65V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3705-50DGNR Overview
There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 30μA. As well as this, there are other features to mention such as [0], for example. To find similar IC managements from the manufacturer, you can always search by TPS3705. At most, voltage supervisor can operate at a supply temperature of 50μA. Featuring 2 elements, this power managment ic has been extensively used in all types of applications.
TPS3705-50DGNR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current
TPS3705-50DGNR Applications
There are a lot of Texas Instruments TPS3705-50DGNR Voltage Supervisors applications.
- Detection of phase loss
- emergency room
- DC stabilized power supply module
- Battery cars
- Kitchen appliances
- Efficient information transmission
- Digitally controlled LDO regulators circuit
- Low voltage/high power - AI, GPU
- Automotive permanent magnet synchronous motors
- Leakage protection
