TPS3705-50DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS3705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 725mW |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 30μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.65V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3705-50DR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 8 pins on power management. Pin count of the power management is 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 30μA supply current present in the power management. There are other features such as RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT to name a few. It is always advisable to use TPS3705, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 50μA can be used. voltage supervisor is comprised of 2 elements and has been extensively used across a wide array of target applications.
TPS3705-50DR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current
TPS3705-50DR Applications
There are a lot of Texas Instruments TPS3705-50DR Voltage Supervisors applications.
- Power communication system
- Magnetic resonance imaging
- Medical-specific isolation transformer
- Urban rail transit weak current power monitoring
- Network equipment
- External alarm
- Stable power system
- Satellite navigation
- Automotive power systems
- Battery cars
