TPS3707-25DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER ON RESET GENERATOR WITH MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | TPS3707 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 725mW |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.25V |
| Undervoltage Threshold | 2.2V |
| Overvoltage Threshold | 2.32V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3707-25DG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is packaged in a Tube way. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 2.5V. When a supply voltage of 1 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 8. 8 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supervisor's supply current is specified to 50μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use TPS3707, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 50μA. There are 2 elements featured in this power managment ic, which has been applied to a variety of applications.
TPS3707-25DG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
50μA operating supply current
TPS3707-25DG4 Applications
There are a lot of Texas Instruments TPS3707-25DG4 Voltage Supervisors applications.
- Microcontroller system
- DC stabilized power supply module
- DVR
- Important electronics for automotive safety
- Automotive permanent magnet synchronous motors
- Household appliances
- Set top box
- Utility meter
- Important electronics for automotive protection
- Digitally controlled LDO regulators circuit
