TPS3707-25DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3707 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.25V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.32V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3707-25DGN Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 2.5V. IC management is possible to find a succession of 1 voltages that have been checked. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 20μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3707, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 50μA. Featuring 2 elements, this power managment ic has been extensively used in all types of applications.
TPS3707-25DGN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
20μA operating supply current
TPS3707-25DGN Applications
There are a lot of Texas Instruments TPS3707-25DGN Voltage Supervisors applications.
- FPGA design
- Military electronics
- DC stabilized power supply module
- Computer applications
- Display equipment
- Medical-specific insulation monitor
- Dash board
- Medical-specific isolation transformer
- Analog circuit
- Battery cars
