TPS3707-30D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS3707 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 725mW |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.63V |
| Overvoltage Threshold | 2.7V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3707-30D Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tube, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. There is a subcategory of this power ic known as Power Management Circuits. A total of 8 pins are located on this power management. The pins of the power management system count 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 20μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3707, which is the base power ics number. The maximum supply temperature voltage supervisor can handle is 50μA. The power management system contains 2 elements and has been extensively used in all aspects of target applications.
TPS3707-30D Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
20μA operating supply current
TPS3707-30D Applications
There are a lot of Texas Instruments TPS3707-30D Voltage Supervisors applications.
- Important electronics for automotive protection
- Analog circuit
- Computer applications
- Digitally controlled LDO regulators circuit
- Telecommunications equipment
- Power distribution systems of infant care room
- Low voltage/high power - AI, GPU
- Kitchen appliances
- Data storage applications
- Display equipment
