TPS3707-30DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS3707 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 725mW |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.57V |
| Overvoltage Threshold | 2.7V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3707-30DG4 Overview
A total of 8 terminals are used to mount this power management. There is a Tube-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. When 3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 8 pins on power management. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 50μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3707, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 50μA. Featuring 2 elements, this power managment ic has been extensively used in all types of applications.
TPS3707-30DG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
50μA operating supply current
TPS3707-30DG4 Applications
There are a lot of Texas Instruments TPS3707-30DG4 Voltage Supervisors applications.
- Magnetic resonance imaging
- Leakage protection
- Electric heating appliances
- Radar
- Telecommunications equipment
- Dash board
- Solar power charger
- Electronics installed in the vehicle
- Set top box
- Smartphones
