TPS3707-30DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3707 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.63V |
| Overvoltage Threshold | 2.7V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3707-30DGNR Overview
This power management consists of 8 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 3V. Power ics operate at 1 supply voltages. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. Power managment ic pin count is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 20μA. A similar IC managements number of the manufacturer can always be found by using TPS3707, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 50μA. With 2 elements, this supervisor is used in all areas of target applications.
TPS3707-30DGNR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
20μA operating supply current
TPS3707-30DGNR Applications
There are a lot of Texas Instruments TPS3707-30DGNR Voltage Supervisors applications.
- Precision measurement
- Battery-powered equipment
- Consumer electronics
- Low voltage/high power - AI, GPU
- Leakage current detection
- Rechargeable batteries
- Unattended substation automation
- Satellite navigation
- Battery cars
- Battery cars
