TPS3707-33DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3707 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3707-33DGN Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Power management is packaged in a Tube way. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. The power management belongs to the Power Management Circuits subcategory. In total, it has 8 pins on IC management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 20μA. It is always advisable to use TPS3707, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 50μA. With 2 elements, this supervisor is used in all areas of target applications.
TPS3707-33DGN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
20μA operating supply current
TPS3707-33DGN Applications
There are a lot of Texas Instruments TPS3707-33DGN Voltage Supervisors applications.
- Data storage applications
- Multi-voltage system
- Kitchen appliances
- Magnetic resonance imaging
- Cloud computing
- emergency room
- Detection of phase sequence
- Electrical fire monitoring system
- Power communication system
- Linux and server computing
