Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
725mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TPS3707 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Number of Elements |
2 |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Nominal Supply Current |
50μA |
Power Dissipation |
725mW |
Max Supply Current |
50μA |
Adjustable Threshold |
NO |
Quiescent Current |
20μA |
Reset |
Active High/Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
1.2V |
Max Reset Threshold Voltage |
1.3V |
Threshold Voltage |
+4.55V |
Undervoltage Threshold |
4.55V |
Overvoltage Threshold |
4.65V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3707-50D Overview
Power management is mounted through 8 terminals. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. There is a subcategory called Power Management Circuits for this power management. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. IC management can only work with a supply voltage of 2V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. As far as the supply current of the power management is concerned, it is 20μA. As well as this, there are other features to mention such as [0], for example. It is always advisable to use TPS3707, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 50μA. With 2 elements, this supervisor has been used extensively in all application areas.
TPS3707-50D Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
20μA operating supply current
TPS3707-50D Applications
There are a lot of Texas Instruments TPS3707-50D Voltage Supervisors applications.
- Radio
- Low voltage/high power - AI, GPU
- Fire equipment power monitoring system
- Electric heating appliances
- Battery-powered equipment
- Leakage current detection
- Detection of phase loss
- Satellite navigation
- Military communications
- Transformer load monitoring equipment