TPS3707-50DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS3707 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 725mW |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.65V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3707-50DRG4 Overview
As you can see, this power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During the reflow process, a peak temperature of 260 is specified for the package. When 5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. Power managment ic pin count is 8. Supply voltage (Vsup) should be at least 2V for this power management. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 20μA, this PMIC is capable of fully function as specified. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR; MANUAL RESET INPUT to name a few. You can always use TPS3707, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 50μA. The power managment ic features 2 elements and has been extensively used in all aspects of target applications.
TPS3707-50DRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
20μA operating supply current
TPS3707-50DRG4 Applications
There are a lot of Texas Instruments TPS3707-50DRG4 Voltage Supervisors applications.
- Medical-specific insulation monitor
- Data storage applications
- Telecommunications equipment
- Multi-voltage system
- Battery-powered equipment
- Battery cars
- Personal computers
- Cloud computing
- Dash board
- Medical-specific isolation transformer
