TPS3801E18DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3801E18 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 4V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 9μA |
| Max Supply Current | 18μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 1.67V |
| Max Reset Threshold Voltage | 1.75V |
| Threshold Voltage | +1.71V |
| Undervoltage Threshold | 1.71V |
| Overvoltage Threshold | 1.75V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3801E18DCKR Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. There are 5-TSSOP, SC-70-5, SOT-353 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3.3V. During operation, the power ic is supplied with a voltage of 1. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 5 pins are present in total in this power management. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 1.6V for this power management. The maximum supply voltage (Vsup) is not to exceed 4V volts in this IC management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 9μA. For similar manage ics search of the manufacturer, you can always refer to TPS3801E18, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 18μA.
TPS3801E18DCKR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
9μA operating supply current
TPS3801E18DCKR Applications
There are a lot of Texas Instruments TPS3801E18DCKR Voltage Supervisors applications.
- Multi-voltage system
- Automotive permanent magnet synchronous motors
- Military communications
- Radar
- Power distribution systems of operating room
- Cloud computing
- DC stabilized power supply module
- Household appliances
- Important electronics for automotive protection
- Microcontroller system
