TPS3801I50DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3801I50 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 20μA |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 4.45V |
| Max Reset Threshold Voltage | 4.65V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.65V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3801I50DCKR Overview
It is mounted through 5 terminals on the power management. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 5-TSSOP, SC-70-5, SOT-353 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. IC management is possible to find a succession of 1 voltages that have been checked. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 5 pins in it. This power management system has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. It is always advisable to use TPS3801I50, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 25μA can be used.
TPS3801I50DCKR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3801I50DCKR Applications
There are a lot of Texas Instruments TPS3801I50DCKR Voltage Supervisors applications.
- Microcontroller system
- Household appliances
- Detection of phase sequence
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- Low voltage/high power - AI, GPU
- Smart meter
- Multi-voltage system
- Satellite navigation
- Urban rail transit weak current power monitoring
