TPS3801J25DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3801J25 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.2V |
| Max Reset Threshold Voltage | 2.3V |
| Threshold Voltage | +2.25V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.3V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3801J25DCKR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. Please find attached 5-TSSOP, SC-70-5, SOT-353 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 9μA volt supply current. To find similar IC managements from the manufacturer, you can always search by TPS3801J25. Voltage supervisor can work with a supply temperature of 25μA at the most.
TPS3801J25DCKR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3801J25DCKR Applications
There are a lot of Texas Instruments TPS3801J25DCKR Voltage Supervisors applications.
- Medical-specific isolation transformer
- Digitally controlled LDO regulators circuit
- Important electronics for automotive protection
- Battery-powered equipment
- Insulation fault location system
- Refrigeration
- Power distribution systems of infant care room
- Electrical fire monitoring system
- FPGA design
- Power communication system
