TPS3801L30DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3801L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.58V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.64V |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.7V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3801L30DCKR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Cut Tape (CT). To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find 5-TSSOP, SC-70-5, SOT-353 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. There is a subcategory called Power Management Circuits for this power management. In total, it has 5 pins on IC management. 5 pins are present on the power management system. IC management can only work with a supply voltage of 2V volts. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a supply current of 9μA for the power management. You can always use TPS3801L30, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 25μA can be used with this power management.
TPS3801L30DCKR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3801L30DCKR Applications
There are a lot of Texas Instruments TPS3801L30DCKR Voltage Supervisors applications.
- Kitchen appliances
- Dash board
- Power distribution systems of CCU
- Unattended substation automation
- Detection of phase loss
- Electronics installed in the vehicle
- Rechargeable batteries
- DVR
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
