TPS3803-01DCKR
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Base Part Number | TPS3803 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 321mW |
| Max Supply Current | 4μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Accuracy | 1.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Threshold Voltage | +1.2V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
TPS3803-01DCKR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Cut Tape (CT)-packaging is used. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a 5-TSSOP, SC-70-5, SOT-353 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 5. The pins of the power management system count 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.3V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 3μA for the power management. To find similar IC managements from the manufacturer, you can always search by TPS3803. A maximum supply temperature of 4μA can be used.
TPS3803-01DCKR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3803-01DCKR Applications
There are a lot of Texas Instruments TPS3803-01DCKR Voltage Supervisors applications.
- Multi-voltage system
- Kitchen appliances
- Telecommunications equipment
- Efficient information transmission
- Sensitive sensors
- Embedded computing
- Radio
- Satellite navigation
- Automotive power systems
- Stable power system
