TPS3803-01DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3803 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 321mW |
| Max Supply Current | 4μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Accuracy | 1.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Threshold Voltage | +1.2V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3803-01DCKRG4 Overview
There are 5 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. There is a subcategory of this power ic known as Power Management Circuits. A total of 5 pins are located on this power management. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.3V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The power management's supply current is 3μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3803, which is the base power ics number. A maximum supply temperature of 4μA can be used.
TPS3803-01DCKRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3803-01DCKRG4 Applications
There are a lot of Texas Instruments TPS3803-01DCKRG4 Voltage Supervisors applications.
- Unattended substation automation
- Battery cars
- Transformer load monitoring equipment
- Urban rail transit weak current power monitoring
- emergency room
- Cloud computing
- Stable power system
- DSP
- Satellite navigation
- Household appliances
