TPS3803-01MDCKREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3803 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 321mW |
| Max Supply Current | 4μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Accuracy | 1.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Threshold Voltage | +1.2V |
| Overvoltage Threshold | 1.5225V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3803-01MDCKREP Overview
There are 5 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 5-TSSOP, SC-70-5, SOT-353 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. In a 3.3V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 5. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.3V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -55°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The power management's supply current is 3μA. A similar IC managements number of the manufacturer can always be found by using TPS3803, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 4μA.
TPS3803-01MDCKREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3803-01MDCKREP Applications
There are a lot of Texas Instruments TPS3803-01MDCKREP Voltage Supervisors applications.
- Household appliances
- Magnetic resonance imaging
- Efficient information transmission
- Fire equipment power monitoring system
- Electrical fire monitoring system
- Insulation fault location system
- Detection of phase loss
- FPGA design
- Computer applications
- Detection of phase sequence
