Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Surface Mount |
YES |
Number of Pins |
5 |
Weight |
19.986414mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Cut Tape (CT) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
321mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.5V |
Base Part Number |
TPS3803 |
Output |
Open Drain or Open Collector |
Pin Count |
5 |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
1.3V |
Operating Supply Current |
3μA |
Nominal Supply Current |
2μA |
Power Dissipation |
321mW |
Max Supply Current |
4μA |
Adjustable Threshold |
YES |
Quiescent Current |
3μA |
Accuracy |
1.5 % |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
Adjustable/Selectable |
Number of Voltages Monitored |
1 |
Reset Timeout |
5μs Typical Propagation Delay |
Threshold Voltage |
+1.2V |
Reset Delay Time |
5.5 μs |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3803-01QDCKRQ1 Overview
It is mounted through 5 terminals on the power management. There is a Cut Tape (CT)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. There are 5-TSSOP, SC-70-5, SOT-353 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 1.5V. Power ics operate at 1 supply voltages. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.3V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 3μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to TPS3803, the base PMIC number. The maximum supply temperature is 4μA. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.
TPS3803-01QDCKRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3803-01QDCKRQ1 Applications
There are a lot of Texas Instruments TPS3803-01QDCKRQ1 Voltage Supervisors applications.
- Automotive power systems
- Magnetic resonance imaging
- Stable power system
- WiFi router
- Medical-specific isolation transformer
- Power distribution systems of CCU
- Military electronics
- DVR
- Precision measurement
- Power communication system