TPS3803G15MDCKREP
| Parameters | |
|---|---|
| Threshold Voltage | +1.4V |
| Undervoltage Threshold | 1.4V |
| Overvoltage Threshold | 1.5225V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3803G15 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 3μA |
| Power Dissipation | 321mW |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Accuracy | 1.5 % |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Typical Propagation Delay |
TPS3803G15MDCKREP Overview
Power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When 3.3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The power management belongs to the Power Management Circuits subcategory. It has a total of 5 pins that are attached to IC management. 5 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.3V for this PMIC. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -55°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 3μA. A similar IC managements number of the manufacturer can always be found by using TPS3803G15, the base power ics number. The maximum supply temperature that PMIC chip can work with is 6μA.
TPS3803G15MDCKREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3803G15MDCKREP Applications
There are a lot of Texas Instruments TPS3803G15MDCKREP Voltage Supervisors applications.
- Personal computers
- emergency room
- Kitchen appliances
- Electrical fire monitoring system
- Radar
- Sensitive sensors
- DVR
- Household appliances
- Unattended substation automation
- Embedded computing
