TPS3803G15QDCKRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | TPS3803G15 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 6μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 321mW |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Accuracy | 1.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 1.379V |
| Max Reset Threshold Voltage | 1.421V |
| Threshold Voltage | +1.4V |
| Undervoltage Threshold | 1.379V |
| Overvoltage Threshold | 1.421V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3803G15QDCKRQ1 Overview
Power management is mounted through 5 terminals. Packaged in the form of a Cut Tape (CT), power management is easy to use. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes 5-TSSOP, SC-70-5, SOT-353 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When 1.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 5 pins on power management. 5 pins make up the power management. A voltage (Vsup) that doesn't fall below 1.3V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 6μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3803G15, which is the base power ics number. The power management can work with a maximum supply temperature of 6μA. As the name implies, this supervisor is a kind of the famous Automotive, AEC-Q100 series product line.
TPS3803G15QDCKRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
6μA operating supply current
TPS3803G15QDCKRQ1 Applications
There are a lot of Texas Instruments TPS3803G15QDCKRQ1 Voltage Supervisors applications.
- Leakage current detection
- Fire equipment power monitoring system
- Detection of phase loss
- Urban rail transit weak current power monitoring
- Sensitive sensors
- FPGA design
- Display equipment
- Power communication system
- Solar power charger
- Smartphones
