TPS3805H33DCKR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3805H33 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 321mW |
| Output Current | 10mA |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Accuracy | 1.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.05V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 3.004V |
| Max Reset Threshold Voltage | 3.096V |
| Threshold Voltage | 3.05 |
| Undervoltage Threshold | 3.004V |
| Overvoltage Threshold | 3.096V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
TPS3805H33DCKR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of 5-TSSOP, SC-70-5, SOT-353 functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. When 3.3V is applied to the power ic, it conducts. IC management conducts in a 2-voltage supply. There is a subcategory of this power ic known as Power Management Circuits. 5 pins are present in total in this power management. The pins of the power management system count 5. It is recommended that Vsup should not be less than 1.3V for this IC power. There should be no more than 6V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 3μA. A similar IC managements number of the manufacturer can always be found by using TPS3805H33, the base power ics number. The maximum supply temperature is 6μA.
TPS3805H33DCKR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3805H33DCKR Applications
There are a lot of Texas Instruments TPS3805H33DCKR Voltage Supervisors applications.
- Military electronics
- Military communications
- External alarm
- Battery-powered equipment
- Insulation fault location system
- Fire equipment power monitoring system
- Microprocessor system
- Multi-voltage system
- Telecommunications equipment
- Microcontroller system
