TPS3805H33MDCKREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3805H33 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 321mW |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.05V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Threshold Voltage | 3.05 |
| Undervoltage Threshold | 3.05V |
| Overvoltage Threshold | 3.3495V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3805H33MDCKREP Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. Please find attached 5-TSSOP, SC-70-5, SOT-353 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 3.3V. Power management conducts at a voltage of 2. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 5 pins. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.3V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -55°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 3μA. You can always use TPS3805H33, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 6μA can be used with this power management.
TPS3805H33MDCKREP Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3805H33MDCKREP Applications
There are a lot of Texas Instruments TPS3805H33MDCKREP Voltage Supervisors applications.
- Power distribution systems of CCU
- Electrical fire monitoring system
- Microprocessor system
- Stable power system
- Unattended substation automation
- DSP
- Electric heating appliances
- Radio
- Computer applications
- Automotive permanent magnet synchronous motors
