TPS3805H33QDCKREP
| Parameters | |
|---|---|
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 321mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3805H33 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 6μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 321mW |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.05V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Threshold Voltage | 3.05 |
| Undervoltage Threshold | 3.2505V |
| Overvoltage Threshold | 3.3495V |
| Reset Delay Time | 5.5 μs |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TPS3805H33QDCKREP Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 2. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. 5 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.3V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 6μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using TPS3805H33, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 6μA.
TPS3805H33QDCKREP Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
6μA operating supply current
TPS3805H33QDCKREP Applications
There are a lot of Texas Instruments TPS3805H33QDCKREP Voltage Supervisors applications.
- Leakage current detection
- Urban rail transit weak current power monitoring
- Important electronics for automotive safety
- Telecommunications equipment
- Battery-powered equipment
- emergency room
- Personal computers
- Consumer electronics
- Low voltage/high power - AI, GPU
- Household appliances
