TPS3806I33DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 3V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3806I33 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 437mW |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 1.198V |
| Max Reset Threshold Voltage | 3.022V |
| Threshold Voltage | 3 |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.022V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3806I33DBVT Overview
This power management consists of 6 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 2 channels that can be found. In this IC management you will find SOT-23-6 functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. When 3.3V is applied to the power ic, it conducts. IC management conducts in a 2-voltage supply. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 6 pins that are attached to IC management. The pins of the power management system count 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.3V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 6V volts in this IC power. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 3μA. Among other features, IC power can be also taken advantage of [0], for instance. For similar manage ics search of the manufacturer, you can always refer to TPS3806I33, the base PMIC number. The maximum supply temperature is 6μA.
TPS3806I33DBVT Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3806I33DBVT Applications
There are a lot of Texas Instruments TPS3806I33DBVT Voltage Supervisors applications.
- Consumer electronics
- DSP
- Insulation fault location system
- Refrigeration
- Radio
- Battery cars
- Multi-voltage system
- Smartphones
- Urban rail transit weak current power monitoring
- Medical-specific isolation transformer
