Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
DETECTION THRESHOLD VOLTAGE IS 1.8V |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
437mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2V |
Terminal Pitch |
0.95mm |
Base Part Number |
TPS3806J20 |
Output |
Open Drain or Open Collector |
Pin Count |
6 |
Operating Supply Voltage |
5.5V |
Number of Channels |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
1.3V |
Operating Supply Current |
3μA |
Nominal Supply Current |
4μA |
Power Dissipation |
437mW |
Max Supply Current |
6μA |
Adjustable Threshold |
YES |
Quiescent Current |
3μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.8V Adj |
Number of Voltages Monitored |
2 |
Reset Timeout |
5μs Typical Propagation Delay |
Threshold Voltage |
1.8 |
Undervoltage Threshold |
1.8V |
Overvoltage Threshold |
1.813V |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3806J20DBVR Overview
There are 6 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Cut Tape (CT) model. For your reference, this IC power includes a list of 1 functions. A series of 2 channels can be found on this supervisor. In this PMIC, you can find SOT-23-6 functions for your reference. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2V supply voltages. When a supply voltage of 2 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 6 pins that are attached to IC management. 6 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.3V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 3μA is the recommended value. The other features include, for example, [0], which is just one example. It is always advisable to use TPS3806J20, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 6μA.
TPS3806J20DBVR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3806J20DBVR Applications
There are a lot of Texas Instruments TPS3806J20DBVR Voltage Supervisors applications.
- Insulation fault location system
- Telecommunications equipment
- Utility meter
- emergency room
- Personal computers
- Computer applications
- Solar power charger
- Automotive permanent magnet synchronous motors
- Power distribution systems of CCU
- DSP