TPS3806J20DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 1.8V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3806J20 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.3V |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 437mW |
| Max Supply Current | 6μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.8V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 5μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 1.198V |
| Max Reset Threshold Voltage | 1.813V |
| Threshold Voltage | 1.8 |
| Undervoltage Threshold | 1.8V |
| Overvoltage Threshold | 1.813V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3806J20DBVT Overview
There are 6 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 2 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 2V volt supply. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. This power ic can be sub-categorized as Power Management Circuits. There are a total of 6 pins on power management. 6 pins make up the power management. It is recommended that Vsup should not be less than 1.3V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 3μA is the recommended value. Additionally, IC management are a variety of features, for example [0], to name a few. You can always use TPS3806J20, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 6μA can be used with this power management.
TPS3806J20DBVT Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3806J20DBVT Applications
There are a lot of Texas Instruments TPS3806J20DBVT Voltage Supervisors applications.
- FPGA design
- DVR
- Display equipment
- Urban rail transit weak current power monitoring
- Microcontroller system
- Military electronics
- Electronics installed in the vehicle
- Battery-powered equipment
- DC stabilized power supply module
- Military communications
