TPS3807A30DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 406mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3807A30 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 2 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 3.5μA |
| Nominal Supply Current | 7.5μA |
| Power Dissipation | 406mW |
| Max Supply Current | 7.5μA |
| Adjustable Threshold | YES |
| Quiescent Current | 3.5μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 20μs Minimum |
| Threshold Voltage | +3V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.62V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3807A30DCKT Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 2 channels can be found on this supervisor. In this PMIC, you can find 5-TSSOP, SC-70-5, SOT-353 functions for your reference. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 3.3V supply voltage, the power management conducts. IC management conducts in a 2-voltage supply. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.8V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 3.5μA volt supply current. A similar IC managements number of the manufacturer can always be found by using TPS3807A30, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 7.5μA.
TPS3807A30DCKT Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.8V
3.5μA operating supply current
TPS3807A30DCKT Applications
There are a lot of Texas Instruments TPS3807A30DCKT Voltage Supervisors applications.
- Smartphones
- Analog circuit
- Medical-specific insulation monitor
- Precision measurement
- Power distribution systems of infant care room
- Household appliances
- Computer applications
- Automotive permanent magnet synchronous motors
- Microprocessor system
- Solar power charger
