banner_page

TPS3808G01DBVT

3.3V6 Terminals 6-Pin TPS3808G01 Voltage supervisor1 Channels Min 1.65V Max 6.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3808G01DBVT
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 633
  • Description: 3.3V6 Terminals 6-Pin TPS3808G01 Voltage supervisor1 Channels Min 1.65V Max 6.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case SOT-23-6
Surface Mount YES
Number of Pins 6
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Termination SMD/SMT
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature DETECTOR THRESHOLD VOLTAGE IS 0.405V
Subcategory Power Management Circuits
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.95mm
Base Part Number TPS3808G01
Output Open Drain or Open Collector
Pin Count 6
Max Output Current 5mA
Number of Channels 1
Max Supply Voltage 6.5V
Min Supply Voltage 1.65V
Operating Supply Current 2.4μA
Nominal Supply Current 2.7μA
Adjustable Threshold YES
Quiescent Current 2.4μA
Watchdog Timer No
Reset Active Low
Min Input Voltage 1.8V
Number of Voltages Monitored 1
Reset Timeout Adjustable/Selectable
Max Input Voltage 6.5V
Supply Current-Max (Isup) 0.0057mA
Threshold Voltage 0.405
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS3808G01DBVT Description

 

The TPS3808G01DBVT series microprocessor monitoring circuit monitors system voltages from 0.4V to 5V and sends an open-drain reset signal when the detection voltage falls below the preset threshold or when the manual reset (MR) pin drops to a logic low level. After the detection voltage and manual reset (MR) are restored above their respective thresholds, the reset output remains low during the user adjustable delay time. The TPS3808 device uses a precision reference voltage source to achieve a threshold accuracy of 0.5% for VIT ≤ 3.3V. The reset delay time can be set to 20 ms by disconnecting the CT pin, the reset delay time can be set to 300 ms by connecting the CT pin to the VDD using a resistor, or the user can adjust between 1.25 ms and 10 s by connecting the CT pin to the external capacitor. The typical static current of the TPS3808 device is very low, 2.4 μ A, so it is very suitable for battery-powered applications. It is available in SOT-23 and 2 mm x 2 mm WSON packages and is fully specified in the temperature range from-40 °C to 125 °C (TJ).

 


TPS3808G01DBVT  Features


? Power-On Reset Generator with Adjustable Delay

Time: 1.25 ms to 10 s

? Very Low Quiescent Current: 2.4 μA Typical

? High Threshold Accuracy: 0.5% Typ

? Fixed Threshold Voltages for Standard Voltage

Rails from 0.9 V to 5 V and Adjustable Voltage

Down to 0.4 V Are Available

? Manual Reset ( MR) Input

? Open-Drain RESET Output

? Temperature Range: –40°C to 125°C

? Small SOT-23 and 2-mm × 2-mm WSON

Packages


TPS3808G01DBVT  Applications



? DSP or Microcontroller Applications

? Notebook and Desktop Computers

? PDAs and Hand-Held Products

? Portable and Battery-Powered Products

? FPGA and ASIC Applications

 



 



Write a review

Note: HTML is not translated!
    Bad           Good