TPS3808G01DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTOR THRESHOLD VOLTAGE IS 0.405V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G01 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | YES |
| Quiescent Current | 2.4μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Min Input Voltage | -300mV |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Max Input Voltage | 7V |
| Supply Current-Max (Isup) | 0.0057mA |
| Threshold Voltage | 0.405 |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G01DBVTG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SOT-23-6 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 6 pins are located on this power management. 6 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.65V. This IC power should be powered by no more than 6.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 2.4μA is the recommended value. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3808G01, which is the base power ics number.
TPS3808G01DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G01DBVTG4 Applications
There are a lot of Texas Instruments TPS3808G01DBVTG4 Voltage Supervisors applications.
- Battery cars
- Low voltage/high power - AI, GPU
- Stable power system
- Medical-specific insulation monitor
- Fire equipment power monitoring system
- Telecommunications equipment
- Computer applications
- Linux and server computing
- Analog circuit
- Personal computers
