Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.95mm |
Base Part Number |
TPS3808G09 |
Output |
Open Drain or Open Collector |
Pin Count |
6 |
Number of Channels |
1 |
Max Supply Voltage |
6.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
2.4μA |
Nominal Supply Current |
2.7μA |
Adjustable Threshold |
NO |
Quiescent Current |
2.4μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
0.84V |
Number of Voltages Monitored |
1 |
Reset Timeout |
Adjustable/Selectable |
Supply Current-Max (Isup) |
0.0057mA |
Min Reset Threshold Voltage |
835.8mV |
Max Reset Threshold Voltage |
844.2mV |
Threshold Voltage |
0.84 |
Undervoltage Threshold |
840mV |
Overvoltage Threshold |
844.2mV |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3808G09DBVR Overview
There are 6 terminals on this power management that allow it to be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SOT-23-6 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. The power management system can be categorized as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. 6 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 2.4μA. You can always use TPS3808G09, the base supervisor number, to search for similar PMICs of the manufacturer.
TPS3808G09DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G09DBVR Applications
There are a lot of Texas Instruments TPS3808G09DBVR Voltage Supervisors applications.
- Cloud computing
- Consumer electronics
- Microcontroller system
- Military electronics
- Detection of phase loss
- Microprocessor system
- Magnetic resonance imaging
- Power distribution systems of CCU
- Satellite navigation
- Rechargeable batteries