TPS3808G12DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G12 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 1.1144V |
| Max Reset Threshold Voltage | 1.1256V |
| Threshold Voltage | +1.12V |
| Undervoltage Threshold | 1.12V |
| Overvoltage Threshold | 1.1256V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G12DBVTG4 Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. There are 6 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. There should be no more than 6.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TJ . As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 2.4μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to TPS3808G12, the base PMIC number.
TPS3808G12DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G12DBVTG4 Applications
There are a lot of Texas Instruments TPS3808G12DBVTG4 Voltage Supervisors applications.
- Transformer load monitoring equipment
- Functional modules
- Consumer electronics
- External alarm
- Microprocessor system
- Computer applications
- WiFi router
- Utility meter
- Leakage current detection
- Military communications
