TPS3808G15DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G15 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 1.393V |
| Max Reset Threshold Voltage | 1.407V |
| Threshold Voltage | +1.4V |
| Undervoltage Threshold | 1.4V |
| Overvoltage Threshold | 1.407V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G15DBVR Overview
There are 6 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. Please find attached SOT-23-6 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The power management belongs to the Power Management Circuits subcategory. There are a total of 6 pins on power management. This power management has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.65V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TJ. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 2.4μA volt supply current. To find similar IC managements from the manufacturer, you can always search by TPS3808G15.
TPS3808G15DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G15DBVR Applications
There are a lot of Texas Instruments TPS3808G15DBVR Voltage Supervisors applications.
- Consumer electronics
- Network equipment
- Magnetic resonance imaging
- Household appliances
- Military electronics
- Linux and server computing
- Power distribution systems of infant care room
- Detection of phase loss
- Automotive permanent magnet synchronous motors
- Set top box
