TPS3808G18DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G18 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 1.8V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 1.6616V |
| Max Reset Threshold Voltage | 1.6783V |
| Threshold Voltage | +1.67V |
| Undervoltage Threshold | 1.67V |
| Overvoltage Threshold | 1.6783V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G18DBVR Overview
This power management consists of 6 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Cut Tape (CT) model. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-23-6 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 3.3V-voltage supply. During operation, the power ic is supplied with a voltage of 1. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. The pins of the power management system count 6. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.65V. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 2.4μA. A similar IC managements number of the manufacturer can always be found by using TPS3808G18, the base power ics number.
TPS3808G18DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G18DBVR Applications
There are a lot of Texas Instruments TPS3808G18DBVR Voltage Supervisors applications.
- Magnetic resonance imaging
- Power communication system
- Fire equipment power monitoring system
- Battery cars
- Refrigeration
- Consumer electronics
- DVR
- Detection of phase sequence
- Radio
- Smartphones
